LEVEL APPLICATION DATA SHEET
Arjay Representative:
End Use: ___________________________________________________________________
System quoted to:_____________________________________________________________
Process Data
Material to be measured (Physical and Chemical). ______________________________________
____________________________________________________________________________
Does the Material composition change? Describe.
____________________________________________________________________________
____________________________________________________________________________
If bulk solids, does the moisture content vary?______________________________________
Is the dielectric known?
Does the dielectric change?
Tank construction material
Tank pressure minimum psi
maximum psi normal psi
Operating Temperature Min C.
Max C. Normal C.
Humidity Changes? Describe _____________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Material Agitation? Describe _____________________________________________________
______________________________________________________________________________
______________________________________________________________________________
PROBE DATA
What length?
(If over 5', specify HEAVY DUTY requirement) _____________________________________
_____________________________________________________________________________
Probe coating is teflon. Is this acceptable?
If no, consult factory for alternates.
Process Fitting is 3/4" NPT SS for Standard Duty
1" NPT SS for Heavy Duty
Is this acceptable? If no, is one of the options acceptable?
Circle one. teflon kynar aluminum
If no, consult factory for alternatives.
Probe Data continued...
Is the process entrance flanged? What size?
What material? ___
Probe head is Standard Explosion Proof Cl 1, Gr. D,
Cl 2, Gr. E,F,G.
Does the probe have a linear ground reference? If not, is a 2" OD concentric shield welded on a 2" NPT bushing acceptable? Or, can the customer supply his own ground reference?
ELECTRONICS
Function required
on/off alarm contacts How many?
4-20mA output
indicating lights
time delay
differential
Power Input
12 vdc 24 vdc 120 vac 220 vac
INSTRUMENTATION ENCLOSURE
(instrumentation may be remote to one mile)
Nema 12 Nema 4 explosion proof
rack mount Nema 4X
(Standard)
PROCESS APPLICATION ANALYSIS
Provide a sketch showing pertinent dimensions, placement of probe entrance, process material entrance and exit, agitators, etc.
By: __________________________ Date: ___________________________
Arjay Engineering Approval By: ____________________________________
Date: ____________________________________